Asus M2N-E

[Christo]

Got it all working

PSU fires up CPU fan fires up and 2 case fans fire up, only trouble is that

there are no post beeps when it fires up also there is no signal to the
monitor, anyone suggest what might be wrong, i am going to try a bare
install just CPU, RAM and graphics

this is my first go at PCI-E graphics and well my first build for some time
i cant understand why the board wont post, everything seems to fire up ok,
please someone give me any pointers?

TIA

Chris

[Mitch Crane]

Post by Christo
Got it all working
PSU fires up CPU fan fires up and 2 case fans fire up, only trouble is that
there are no post beeps when it fires up also there is no signal to
the monitor, anyone suggest what might be wrong, i am going to try a
bare install just CPU, RAM and graphics
this is my first go at PCI-E graphics and well my first build for some
time i cant understand why the board wont post, everything seems to
fire up ok, please someone give me any pointers?

Clear CMOS, check that everything is seated properly, check your power
connections (don't forget the 4 pin power connector and if the video card
has one make sure that is plugged in). If that fails I think I'd try a new
PSU first.